Details

What should be considered in the installation design of the basketball court sports floor？

Foundation flatness: Firstly, it is necessary to ensure that the foundation of the basketball court is flat to avoid shaking or tilting of the sports floor after installation due to uneven ground.

Check the batch and quantity of products: Before installation, it is necessary to check the batch and quantity of sports flooring to ensure that the color and specifications of the same batch of sports flooring are consistent, and to avoid color differences and size mismatches.

Match the floor color according to the construction drawings: According to the requirements of the construction drawings, select the floor color that meets the requirements for laying.

Paving method: There are two main methods for paving the basketball court sports floor , one is the positioning point paving method, and the other is the top left paving method.

Positioning point paving method: Take a parallel line from the basketball racks on both sides, and take a parallel line from the first half of the entire basketball court. The intersection point of the two lines (also the positioning point of the football field) is the starting point for paving, and then extend the sports floor around it. Pay attention to aligning the horizontal and vertical parallel lines at both ends to prevent the venue from tilting after paving. The advantage of this paving method is the symmetry around it, which makes it less prone to tilting towards a certain angle. The disadvantage is that sometimes reverse installation is required during paving, making construction difficult.

Using the upper left paving method: Use a meter ruler over thirty meters to measure the specifications of all locations and draw four corner points. Starting from the upper left, gradually connect the floor along the lower right direction (90 ° fan shape). Pay attention to adjusting the flooring with different color tones according to the engineering drawings, and at the same time, check the installed flooring perspective anytime and anywhere to prevent excessive or small viewing angles from harming the splicing of the flooring. The advantage of this paving method is convenient splicing and installation, without the need for reverse splicing. The disadvantage is that the difficulty in the gap between suspended floor specifications can easily lead to deviation of all locations and data information errors, which must be carefully adjusted by the construction team.

The above are the installation and design points for the suspended floor of the basketball court